Koneksi Ubuntu dengan Modem + Telkomsel Flash

langsung aja masuk terminal
umar@:~$ sudo su
[sudo] password for umar:
root@umar-desktop:/home/umar# wvdialconf
Editing `/etc/wvdial.conf’.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB3<*1>: ATQ0 V1 E1 — OK
ttyUSB3<*1>: ATQ0 V1 E1 Z — OK
ttyUSB3<*1>: ATQ0 V1 E1 S0=0 — OK
ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 — OK
ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB3<*1>: Modem Identifier: ATI — Manufacturer: Sierra Wireless, Inc.
ttyUSB3<*1>: Speed 9600: AT — OK
ttyUSB3<*1>: Max speed is 9600; that should be safe.
ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB4<*1>: ATQ0 V1 E1 — OK
ttyUSB4<*1>: ATQ0 V1 E1 Z — OK
ttyUSB4<*1>: ATQ0 V1 E1 S0=0 — OK
ttyUSB4<*1>: ATQ0 V1 E1 S0=0 &C1 — OK
ttyUSB4<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyUSB4<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB4<*1>: Modem Identifier: ATI — C885
ttyUSB4<*1>: Speed 9600: AT — OK
ttyUSB4<*1>: Max speed is 9600; that should be safe.
ttyUSB4<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB5<*1>: ATQ0 V1 E1 — OK
ttyUSB5<*1>: ATQ0 V1 E1 Z — OK
ttyUSB5<*1>: ATQ0 V1 E1 S0=0 — OK
ttyUSB5<*1>: ATQ0 V1 E1 S0=0 &C1 — OK
ttyUSB5<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyUSB5<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB5<*1>: Modem Identifier: ATI — C885
ttyUSB5<*1>: Speed 9600: AT — OK
ttyUSB5<*1>: Max speed is 9600; that should be safe.
ttyUSB5<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB6<*1>: ATQ0 V1 E1 — OK
ttyUSB6<*1>: ATQ0 V1 E1 Z — OK
ttyUSB6<*1>: ATQ0 V1 E1 S0=0 — OK
ttyUSB6<*1>: ATQ0 V1 E1 S0=0 &C1 — OK
ttyUSB6<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyUSB6<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB6<*1>: Modem Identifier: ATI — C885
ttyUSB6<*1>: Speed 9600: AT — OK
ttyUSB6<*1>: Max speed is 9600; that should be safe.
ttyUSB6<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
Found a modem on /dev/ttyUSB3.
Modem configuration written to /etc/wvdial.conf.
ttyUSB3: Speed 9600; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″
ttyUSB4: Speed 9600; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″
ttyUSB5: Speed 9600; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″
ttyUSB6: Speed 9600; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″
sekarang tinggal edit sedikit di file /etc/wvdial.conf

root@umar-desktop:/home/umar# nano /etc/wvdial.conf
Init3 = AT+CGDCONT=1,\”IP\”,\”internet\”
tambahkan 1 baris tersebut dibawah tulisan
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

kemudian edit baris username, password, dan dialer.
jadi kurang lebih, isi filenya seperti ini :
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,\”IP\”,\”internet\”
Modem Type = Analog Modem
Baud = 9600
New PPPD = yes
Modem = /dev/ttyUSB3
ISDN = 0
Phone = *99***1#
Password = ”
Username = ”

Posted in: